For more than 50 years, Honeywell has provided a legacy of globe valves with the most precise control for any application. The current families of globe valves and actuators provide the rangeability and close off needed to keep the tightest control of your environment. As an authorized distributor, we take pride partnering with Honeywell, to inform our customers about innovative solutions such as this one.
Provide the rangeability and close-off needed to keep tight control of the environment
Available in threaded (1/2″ – 3″) or flanged (2-1/2″ – 6″)2-Way and 3-WayEqual percentage flowStainless steel stem and trim2-position or precision modulating control of hot and chilled water or steamAccurate positioning with equal percentage and linear flow characteristics to ensure state-of-the-art temperature control.
Two-Way Threaded Globe Valve
The V5011N is a two-way threaded globe valve for control of steam, water, and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. These valves are used in two-position and modulating control systems. The valve is not suitable for combustible gas service.
FEATURES
- Red brass body with NPT-threaded end connections.
- Low seat leakage rate (≤0.05 percent of Cv).
- 50:1 rangeability per VDI/VDE 2173.
- Spring-loaded, self-adjusting packing.
- Accurate positioning to ensure state of the art temperature control.
- Directly coupled electric and pneumatic actuators for easy mounting.
- Sizes range from 1/2 in. to 2 in.
- Valve designs provide equal percentage flow characteristic for water and linear flow characteristic for steam.
- Stainless steel stem and metal-to-metal seats.
- Repack and rebuild kits for field servicing.
Three-Way Threaded Globe Valve
The V5013N is a three-way threaded globe valve that controls hot water, cold water, and glycol solutions (up to 50 percent concentration) in heating or cooling HVAC applications. The valve is used for mixing service to direct flow from one of two inlets to a common outlet in two-position or modulating control systems.
FEATURES
- Red brass body with NPT-threaded connections.
- Stainless steel stem and brass plug.
- Low seat leakage rate (≤0.05 percent of Cv).
- Spring-loaded, self-adjusting packing.
- 50:1 rangeability per VDI/VDE 2173.
- Constant total flow throughout full stem travel.
- Accurate positioning to ensure state of the art temperature control.
- Sizes range from 1/2 in. to 2 in.
- Suitable for pneumatic or electric/electronic actuation.
- Repack and rebuild kits available for field servicing.
V5011N valves are single-seated, two-way, straight- through valves that provide control of steam, glycol solutions (up to 50 percent concentration) and hot or chilled water in HVAC systems requiring tight shutoff. V5013N valves are three-way mixing valves that provide proportional control of glycol solutions (up to 50 percent concentration) and hot or chilled water in HVAC systems. V5013N valves direct the flow from one of two inlets to a common outlet (mixing).
V5011N and V5013N are suitable for actuation with pneumatic actuators such as MP953; for actuation with electric operators such as Modutrol IV Motors when used with Q5001 linkage; for electric actuation using valve direct-coupled actuators such as ML6874, ML7984, ML6421, ML7421, ML6425, and ML7425. Refer to actuator specifications to determine dimensional, wiring and mounting requirements for a particular actuator. Table 1 shows the available size and flow capacities for the valves. The stroke for both valves is 3/4 in. (20 mm).
